|
|
Exclude
Jul 26, 2015 13:18:14 GMT -5
Post by spud on Jul 26, 2015 13:18:14 GMT -5
Just for giggles are you running Pilots VECTOR? Are the towers you see power line transmission towers? If so are try this:
go to the VECTOR Configuration tool and open the 'Various Features' tab. Uncheck the 'Power Lines' box.
It will turn off ALL transmission towers world wide so its not a good solution but if it does eliminate the towers the problem is caused by VECTOR and that may be why you can't obliterate them.
|
|
|
|
Exclude
Jul 26, 2015 15:36:21 GMT -5
Post by Bushpounder on Jul 26, 2015 15:36:21 GMT -5
I will bet that is what it is, Spud. Yes, I do run Vector. Thanks for that. Still, I wonder why I cannot remove the three, unless they are ALL bundled together as one.Thanks again!
BP;)
|
|
|
|
Exclude
Jul 26, 2015 16:36:55 GMT -5
Post by Bushpounder on Jul 26, 2015 16:36:55 GMT -5
Perfect, Spud. No more towers.  Thankyou! BP;) |
|
|
|
Exclude
Jul 27, 2015 1:20:53 GMT -5
Post by pivo11 on Jul 27, 2015 1:20:53 GMT -5
Yep, thanks, Spud. It is a bit of a shame, though, that you can't exclude them individually.
|
|
|
|
Exclude
Jul 27, 2015 12:29:53 GMT -5
Post by spud on Jul 27, 2015 12:29:53 GMT -5
Why don't you report this to Pilot's on the VECTOR Support forum at ORBX? There is already a post about another airport in Switzerland with the same problem (but different(LOL))
Perhaps they will come up with an update in later versions of VECTOR as I see it as an error in their coding apparently.
|
|
|
|
Exclude
Jul 28, 2015 1:20:24 GMT -5
Post by pivo11 on Jul 28, 2015 1:20:24 GMT -5
Might just do that. Worth a try, anygate.
|
|
Thankyou!