Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 12, 2017 20:53:25 GMT -5
Having a wee problem with this A/C. The effectiveness of the toe brakes is very poor. I adjusted the scalar of the toe brakes in the A/C CFG file to 4.5 from its original 0.7, ? ----the results are the same. How to adjust the brakes 
I figured that the higher the Scalar value of the toe brake setting,, the more the effectiveness of the toe brakes, is that right ??  Need some guidance here please !!!! Carm --- [ the guy with the Bonanza off the end of the runway >>] |
|
|
|
Post by penzoil3 on May 13, 2017 18:48:08 GMT -5
Just installed both for testing in P3D. They stop for me with the toe brakes. Took them up to 60 knots, then braked. They eventually stopped. I've seen better. Will play with settings and get back to you.
Sue
|
|
|
|
Post by Bushpounder on May 13, 2017 18:51:24 GMT -5
That is one I do not have, Carm. I'm sure Sue will keep you out of the weeds!
BP;)
|
|
|
|
Post by penzoil3 on May 13, 2017 19:06:36 GMT -5
From the Microsnot Library msdn.microsoft.com/en-us/library/cc526949.aspxtoe_brakes_scale Sets the scaling of the braking effectiveness. 1.0 is the default. 0.0 scales the brakes to no effectiveness. Will test and get back to you again. |
|
|
|
Post by penzoil3 on May 13, 2017 19:30:35 GMT -5
4.3 stops a lot faster. Are you saving the aircraft.cfg file after you change it ? Also check your throttle calibration, to make sure zero throttle really is.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 13, 2017 20:57:35 GMT -5
Thanks for the help Sue. I can now stop before the 'bushes' at my local patch.  |
|
|
|
Post by penzoil3 on May 13, 2017 23:59:59 GMT -5
Always nice to not imitate Sean Spicer and hide in the bushes.
LOL
Sue
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 14, 2017 5:27:39 GMT -5
 Actually, that whole group are more to be pitied than made fun of. IMO. " Into the bushes little Girl" !! ---- "But I'm only thirteen !!! ", -----Who's superstitious !!! ---- "Into the bushes !!! "  Cheers, Carm.
|
|
|
|
Post by spud on May 14, 2017 21:49:15 GMT -5
One thing to remember when altering the A/C Config. file is that to make the changes take effect you must re-load the A/C every tgime after altering the Config. file.
|
|
|
|
Post by penzoil3 on May 15, 2017 19:26:33 GMT -5
I never alter the file with the sim running.
|
|
