|
|
Post by spud on Jan 9, 2017 12:53:05 GMT -5
|
|
|
|
Post by penzoil3 on Jan 9, 2017 17:24:30 GMT -5
It's beautiful!!! Downloaded and flew a bit last night. Whee!
Don't forget to update the libraries! See here-
Sr. Member
Re: BWEP: Richardson Highway is Released!!
« Reply #2 on: January 08, 2017, 10:09:06 PM »
Quote
An additional note: You must also download and install the newly combined RTMM Medical and APP Libraries FSXP3D. These are now required RTMM libraries as they contain some objects used in the BWEP project and future scenery projects. If you have the old APP and Medical Temp libraries, remove them from your scenery library and then delete them from your system (in that order) before installing the newly combined APP and Medical libraries.
Ualani
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 9, 2017 20:22:29 GMT -5
Thanks for the HU on this Spud. Looks pretty dern good.
|
|
|
|
Post by olderndirt on Jan 9, 2017 22:13:09 GMT -5
Fairbanks already - this literally opens a north-south swath of scenery through Alaska.
|
|
|
|
Post by spud on Jan 10, 2017 9:34:40 GMT -5
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 10, 2017 12:00:09 GMT -5
Dang it all !!! I just found out that I've lost all my pipes in BMEP. Valdez and the tanks and tanker seem okay, but no piping. HMMM !!! HOLD ON !!!! We have the pipeing now, all the way to Fairbanks.------ Read the directions when all else fails.  |
|
|
|
Post by penzoil3 on Jan 11, 2017 4:45:22 GMT -5
Told you ! ROFLMAO! Sue It's beautiful!!! Downloaded and flew a bit last night. Whee! Don't forget to update the libraries! See here- Sr. Member Re: BWEP: Richardson Highway is Released!! « Reply #2 on: January 08, 2017, 10:09:06 PM » Quote An additional note: You must also download and install the newly combined RTMM Medical and APP Libraries FSXP3D. These are now required RTMM libraries as they contain some objects used in the BWEP project and future scenery projects. If you have the old APP and Medical Temp libraries, remove them from your scenery library and then delete them from your system (in that order) before installing the newly combined APP and Medical libraries. Ualani |
|
|
|
Post by olderndirt on Jan 11, 2017 12:05:05 GMT -5
Quite a few pipe breaks or maybe it's just me  . |
|
|
|
Post by spud on Jan 12, 2017 10:11:39 GMT -5
Check your FSX settings, particularly MESH Resolution at 5M.
Do you use a third party MESH? We have one BETA testor who has one area with pipeline joint misalignments and has not been able to solve his problem as yet. Make sure your FSX Scenery Settings conform to the recommended ORBX settinngs.
Be sure and download the correct version and conform to the following cut n' paste from the BWEP page:
* NOTAM:
A-BWEP Southern Alaska Default is for BWEP for SAK with the ORIGINAL PAVD airport.
B-BWEP Southern Alaska with PAVD is BWEP for SAK using the PAVD PayWare from ORBX.
If you do not plan on using the PAVD Payware airport, then select the default edition (#1). Users of BWEP Southern Alaska who are using the PAVD Payware airport MUST use payware edition only(#2). You can only have ONE edition of this scenery project activated in your Scenery Library at any time.
** NOTAM: "Along the Way" We have placed interesting locations along the pipeline for you to visit. By clicking on these, you are taken to the scenery page to the section where the download for the location is located. The Exception is Fairbanks Float Planes which is a direct download.
NOTAM: You must have the latest Medical and APP Object Library found on the Objects Library Page. There are multiple medical facilities in BWEP at each airport and this new library was recently updated.
|
|
|
|
Post by olderndirt on Jan 13, 2017 21:08:11 GMT -5
Now I know. The gents at RTMM say their BWEP pipeline scenery WILL show broken pipe in the "Richardson Highway" software unless you're using Pilots FTX2010 mesh. I have their (Pilots) updated "Ultimate" product and it don't (work).
|
|
|
|
Post by spud on Jan 14, 2017 14:05:52 GMT -5
Now I know. The gents at RTMM say their BWEP pipeline scenery WILL show broken pipe in the "Richardson Highway" software unless you're using Pilots FTX2010 mesh. I have their (Pilots) updated "Ultimate" product and it don't (work). Unfortunately the "Ultimate" Pilots MESH uses different data that the FTX COMPATIBLE mesh and causes broken section of the pipeline. Although the Richardson Hwy section is north of the FTX developed scenery boundary for Alaska RTMM conformed to that MESH as eventually ORBX scenery further north would presumeabley still utilize the same MESH as all their other scenery in North America. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 14, 2017 15:03:37 GMT -5
So, if you were getting mesh today, would you suggest the Pilot's FTX2010 mesh then?
|
|
|
|
Post by penzoil3 on Jan 14, 2017 20:21:10 GMT -5
|
|
|
|
Post by olderndirt on Jan 14, 2017 20:43:07 GMT -5
So, if you were getting mesh today, would you suggest the Pilot's FTX2010 mesh then? As Spud noted, the BWEP software is designed with FTX2010 mesh in mind; however the data in it is older, with lesser definition than 'Ultimate' - as Stefan at "Pilots" emphasized before my purchase. The RTMM product has been my first elevation problem and I'll live with it. Stefan has a new 'Ultra Ultimate' - latest data and worth a look. Another player 'Justin', formerly of 'Flight Genesis', is back with "Toposim" and is offering an attractive Global bundle. You've just got to ask - do I want the pipe sections in BWEP to appear joined or do I want the best LOD/Meter mesh available. |
|
.